Game Boy Bivert/Hex Module V2 | DMG

Game Boy | DMG | Original Collection by Hand Held Legend

$3.99 USD Sale price

Regular price $3.99 USD

See our Game Boy Pocket Bivert Module here

Bivert modules are an effective way to upgrade the appearance of your LCD display. This easy to install module increases contrast by biverting (inverting) the orientation of the pixels of your screen. Once installed, pixels will have a blue appearance and enhanced gray scale saturation. The board lies flat on the PCB and lines up with the exact solder points you need to use!

  • 0.6mm board - super thin!
  • 2mm added to the bottom of the board for easy soldering (V1 -> V2)
  • Compatible with the Game Boy Original (DMG) and the Game Boy Pocket (MGB) (Extra wires needed)
  • Only 1 wire required for install in the DMG | 1 Wire is included!
  • Hex inverter is already soldered for you
  • Grounding for the remaining pins for increased reliability

DMG installation instructions here

What you need to install:

We recommend  the "pin lift" method when installing. 

See our Game Boy Pocket Bivert Module here

Bivert modules are an effective way to upgrade the appearance of your LCD display. This easy to install module increases contrast by biverting (inverting) the orientation of the pixels of your screen. Once installed, pixels will have a blue appearance and enhanced gray scale saturation. The board lies flat on the PCB and lines up with the exact solder points you need to use!

  • 0.6mm board - super thin!
  • 2mm added to the bottom of the board for easy soldering (V1 -> V2)
  • Compatible with the Game Boy Original (DMG) and the Game Boy Pocket (MGB) (Extra wires needed)
  • Only 1 wire required for install in the DMG | 1 Wire is included!
  • Hex inverter is already soldered for you
  • Grounding for the remaining pins for increased reliability

DMG installation instructions here

What you need to install:

We recommend  the "pin lift" method when installing. 

Customer Reviews

Based on 28 reviews
100%
(28)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
G
G.D.
Mixed

I had one that went on no issue and another where the solder pad for the ground came off for seemingly no reason. That's what you get for $3.99 I guess. Time for an IPS.

M
M.A.
Super easy install

Love this chip!

C
C.
Installed and works well, with a couple caveats

Got this installed and working well with the backlight mod. A couple notes, though: you'll want to trim down the main board's pins for PIN1, PIN3, and the VCC so you can solder them without issue. Also, be a bit mindful of the ground wire contact on the module: I might have used too hot of an iron and it seemed to peel up a bit, though not irreparably so. Just be careful.

G
G.
A Must Have

Great little chip and easy to install. A must have if you don’t want to do an entire LCD display swap on your DMG1. Makes all the difference when accompanied with their screen replacement as well.

J
J.
A must have for a modified DMG

Having this added to my DMG made a HUGE difference. It wasn't too terribly difficult to install but does require soddering and some ammount of precision but was absolutly worth it.

p
p.
Easy to install mod

I got one Bivert v2 to got with the Backlight Display Mod V3. The chip was easy to install following the instructions. It fit nicely on the board.