Game Boy Pocket Bivert Module | Mini

SKU: GBP1534
Sale price
$4.49 USD
List price
$4.99 USD
You save
-$0.50 USD (11%)
In stock! Usually ships within 24 hours.
Pickup available at 519 Davisville Rd.

Usually ready in 2-4 days

View store information

A mini game boy pocket bivert module to simplify your installation and save room in your case. Bivert Modules, also known as Hex modules, will invert your pixels and enhance your display if you are using a backlight.

  • 1 module included
  • No wires needed
  • Electrical solder and soldering iron required

Instructions (see also product images)

  1. Cut the traces outlined in the product photos to ensure proper function (be careful not to cut any other traces)
  2. Prep your module by applying a small amount of electrical solder on the bottom and side of each pad.
  3. Flux will help your solder flow where you would like it to, so apply it sparingly to the desired contact point.
  4. Solder your module to the capacitor directly left of the cut traces and align the top and bottom pairs of pads to the traces you just cut.
  5. Press down on the top of the pad with a fine tipped soldering iron and allow the heat to travel to the bottom of the board and melt the solder underneath.
  6. Your module should be securely attached.
  7. Test your LCD for correct installation.
  8. Enjoy!

Created and inspired by J. Rodrigo; Installed close-up photo by Kyle Bottorff.

Shipping Information

Our on-line store is open 24/7 and we ship Monday through Friday, excluding some holidays. Most products ship within 1 business day from our warehouse in Pennsylvania USA. Orders will be shipped in the order they are received. Please select a shipping speed according to your needs.

About Us

Hand Held Legend is committed to keeping retro gaming alive and better than ever. Upgrade your childhood consoles with modern tech. We strive for excellence in all that we do and aim to serve our customers well.

Customer Reviews

Based on 16 reviews
Too difficult

I botched two gameboys trying to use these. Way too small and they just don't seem to line up with the libs right no matter what. I've tried this mod multiple times and never been able to get a clear image and always end up doing it over so many times I damage the board. Waste of money.

Upgraded my childhood Gameboy.

The Bivert Module is very small, took me a couple tries to get it soldered properly but it works great.

Jamie Hodgson
Didnt work for me :(

unfortunately the bivert chip didnt work so had to scrap it

Mona Esawy
not for a beginner

super great service, just my fault because I'm a complete novice when it comes to soldering. I successfully soldered an ips screen, backlight but messed up real bad with the bivert for pocket. it is super, super small and if you aren't pretty great with soldering especially small regions please consider that. I (think) I messed up the whole board lol. but otherwise !! great product!! :)

Vitali Heidenreich
Ok, but expensive



Game Boy Pocket Bivert Module | Mini

Visit our YouTube Channel

Learn how to mod your favorite game systems on our YouTube channel.

You may also like