Game Boy Advance Ribbon Cable Adapter
Game Boy Advance Ribbon Cable Adapter
SKU : GBA6504
Install this cable into your Game Boy Advance in order to install your AGS-101 Game Boy SP LCD.
INCLUDED:
- 1x Ribbon Cable Adapter
DOCUMENTATION:
How do I know which adapter I need? Look on the back of your GBA after removing the battery compartment to find a number on the PCB:
- 40 pin has white connector
- 32 pin has white connector
- 32 pin models start with a "1"
- 40 pin models start with a "0"
Using this cable may cause your screen to look washed out. If so, check out this thread. We cannot fully support that this item will work with the AGS-001 LCD. Refunds are not accepted in this instance.
WARNINGS:
- Test before installation! When you receive a backlight/LCD kit, you should perform a dry run before installing to assure that nothing has been damaged in transit. A dry run or test fit means the kit is not installed in the shell. This includes the use of adhesives, brackets, and any performed soldering. All ribbon cables should have no bends or creases in them. If you are unsure how to perform a dry run, please contact our support team and we will be happy to help. Backlight kits that have been installed are not eligible for replacement or return.
-
LCD may break if put under too much pressure or dropped. Please exercise extreme caution when installing.
Friendly Returns
Secure Checkout
1-2 Days Shipping
Prompt Customer Support
Customer Reviews
Installation went smooth.
Soldering point is not required in order for the ribbon to work but will set brightness to max.
The connector latch is hilariously narrow. you have to completely remove it and then use electrical tape to hold it down. It barely holds the signal without the latch's pressure, so I removed the tab from my ribbon cable and it was still too thick. I ended up kinking my ribbon cable and destroying the whole display. Thanks a bunch, HHL.
I'm sorry to hear of the issue. Please contact us at support@handheldlegend.com so we may resolve this for you.
I installed the ribbon on a 32 pin agb 001 with my ags 101 screen panel, installation was easy. And it just worked. I like it a lot better than the ips screens. This is my new favorite way to enjoy the gba game catalogue.
Easy install, couple case snips and a single solder point. If you have a faulty AGS 101 laying around and a gba you haven’t IPS modded, this is a great cheap way to make it far more playable.
Once it was installed into a GBA SP AGS 101 Screen thanks to DK Oldies it's sharper and better than the original screen.
Amazin, I lost the resistor and emailed them asking which one it was. They replied very fast and I was on my way modding my gameboy. Great customer service, item got to me very quick. Love this website!
Orders placed with us will be fulfilled within 1 to 2 business days. Delays may occur depending on the volume we experience. This is especially true during sales and around the winter holidays. Once a package is fulfilled, we are unable to make any changes to the order or cancel it. Please review your entire order and the shipping information before completing the order for accuracy. Refunds will not be given under these circumstances. Once packages leave our warehouse, it is not in our control how fast it will get to you from there regardless of shipping option chosen. The shipping times shown are estimates, not guarantees. Refunds will not be given under these circumstances.
Free Shipping for order of $75 or more*. Exludes Ultimate conoles and custom controllers.
Hand Held Legend is committed to keeping retro gaming alive and better than ever. Upgrade your childhood consoles with modern tech. We strive for excellence in all that we do and aim to serve our customers well.
*If you would like to return or receive a refund on any item, please contact support@handheldlegend.com first to ensure that your item will qualify.
Purchases are eligible for return within 30 days of purchase. If 30 days have gone by since your purchase, unfortunately we can’t offer you a refund or exchange.
When you receive a backlight/LCD kit, you should perform a dry run before installing to assure that nothing has been damaged in transit. A dry run or test fit means the kit is not installed in the shell. This includes, but is not limited to, the use of adhesives, brackets, and any performed soldering. All ribbon cables should have no bends or creases in them. If you are unsure how to perform a dry run, please contact our support team and we will be happy to help. Backlight kits that have been installed are not eligible for replacement or return. If a backlight/LCD is returned and shows any signs of having been installed, it will not be eligible for a refund.
Requested returns/refunds/exchanges for items you believe to be defective, will be subject to a troubleshooting process with our support team before proceeding with a return/replacement/refund.
Modifying a product in any way, including but not limited to removing or adding components, will result in the voiding of our return/refund policy.
To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging.
Defective or damaged parts are free to return within 30 days of purchase. Shipping costs are not covered for items returned at a customer's request or the refusal of the troubleshooting process with our support. Refunds for shipping costs and Route Shipping Insurance will not be given.
Please note that international orders are not eligible for a prepaid shipping label for returns on defective products. Returns must be paid for by the customer.
To complete your return, we require a receipt or proof of purchase.
Returns can be sent to:
Hand Held Legend
Attn: Returns
519 Davisville Road; Unit 102
Willow Grove, PA 19090
There are certain situations where only partial refunds are granted (if applicable).
We reserve the right to deduct an amount proportional to the chosen shipping return method from your refund if you order does not quality for a free return:
Refund Deduction Amounts by Shipping Method (USA):
- $5.00 for USPS First Class Mail Returns
- $10.00 for USPS Priority Mail Returns
- $13 for all over carrier returns
REFUNDS (IF APPLICABLE)
Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund.
If you are approved, then your refund will be processed, and a credit will automatically be applied to your original method of payment, within 1-7 business days.
Refunds for shipping costs and Route Shipping Insurance will not be given.
LATE OR MISSING REFUNDS (IF APPLICABLE)
If you haven’t received a refund yet, first check your bank account. Then contact your bank or credit card company. It may take some time before your refund is officially posted.
If you’ve done all of this and you still have not received your refund, please contact us at support@handheldlegend.com.
EXCHANGES (IF APPLICABLE)
We only replace items if they are defective or damaged. If you need to exchange it for the same item, send us an email at support@handheldlegend.com.
CANCEL/EDIT ORDERS
You may cancel or edit orders yourself (before fulfillment) by following the steps in this guide. If you edit/cancel your order, you can expect a refund within 1 to 7 business days. Orders that have been fulfilled by our shipping team cannot have edits made or be canceled. We will do our best to assist customers in this process if needed, but it is the responsibility of the customer to ensure that their order and shipping information is correct before processing the order. We are not responsible for any issues that may occur due to incorrect items, shipping information, etc on orders.