Add reactive LED's to your Nintendo GameCube controller with this fantastic product from RockerGaming. The mod was designed with Super Smash Bros in mind but it works far all games and titles. This mod works by using a microcontroller to read controller inputs and animate LED's with pre-programed animations.
FEATURES:
-
Compatible with the Nintendo GameCube, Wii, Wii U, and Nintendo Switch (appropriate OEM adapters required)
- LED's react to controller inputs in real time
- 13 color modes including character specific modes
- Hot-swap modes on the fly through button combinations
NOTES:
- Character specific modes are set a random and cannot be customized at this time. There is only one character animation set per kit. The controller will default back to its set character mode when powered off or unplugged.
INCLUDED:
- 1 x Main board
- 1 x C stick board
- 1 x Controller Cable Quick Solder Board (QSB)
- 2 x flex cables
- 1 x Custom laser cut double-sided adhesive for the c stick and main board
CLEAR CONTROLLER BACKS
- OEM Nintendo clear back (T1 or T2) - these are typically found on indigo and clear controllers and require zero modification to work with this mod.
- OEM Nintendo clear back (T3) - these are typically found on all clear oem controllers that have a T3 board in them. This will require a few controller supports to be cut with a pair of flush cuts. Please refer to the modification guide
- Controller Chaos Clear - This is a replica of the Smash 5 controller shell. These will require a few supports to be cut with a pair of flush cuts and are similar to the steps needed for the OEM Nintendo clear back.
- Technogame/TTX clear back - Beyond the modifications required to make this clear back work with an OEM front shell, no further modifications are required.
PAIRS WELL WITH:
DOCUMENTATION:
Check out more by RockerGaming
