**This kit is strongly recommended to use with these shells only**

Backlight and illuminate your beloved childhood GBC with a modern IPS LCD with improved color, contrast and viewing angle. This enhanced version of the 1.0 kit comes with a custom lens pre laminated to the LCD, choose your color.

FEATURES:

• Adds function to adjust position of the screen window
• Applicable console text is present on lens. Adds function to change logo backlight display and color. 
• Display area is larger than the original. Best when using a custom laminated shell from Funnyplaying. Shell modification required for all other shells.
• Soldering required for brightness and retro pixel control
• Built-in 5 display effects.
• 4x Integer scaling
• LCD and ribbon power between 0.29W and 0.68W
• Pre laminated lens on the LCD
• Touch enabled function control for brightness and pixel modes
• No frame dropping or tearing

INCLUDED:

• 1x Enlarged IPS LCD with laminated lens already adhered
• 1x Flex PCB cable
• 1x Touch sensor cable (Shape/style will vary by kit but functionality remains the same.) 
• 3x Wires for power and function adjustments
• 1x 3M Adhesive

FUNCTIONS:

• Hold down START and SELECT together for a few seconds, the "GAME" on the lens should be the only word lit up. This is "Mode 1."  Here you can use the SELECT and START button to move the display image down and up respectively. 
• Tap on the touch sensor to bring it to "Mode 2." You should see "Boy" lit up now. Here You can use SELECT and START to move the display image left and right respectively.
• Tap on the touch sensor again to bring it "Mode 3." You should see "Color" lit up. Use START and SELECT separately to cycle through the different color options. 
• Hold down START and SELECT together again for a few seconds to confirm, and exit.  
• To cycle the different Pixel modes, tap and hold where the touch sensor is for a few seconds, and the LCD will change to different screen modes each time you perform this. 

PIXEL MODES: