Game Boy Advance Replacement Shell
HISPEEDIDO
Color
Game Boy Advance Replacement Shell
Clear Pink
519 Davisville Rd.
519 Davisville Road
Willow Grove PA 19090
United States
Choose options
HISPEEDIDO
Color
HISPEEDIDO
Color
A replacement OEM style shell for your beat up or busted GBA. Get your shell in a classic color or jazz things up with a new color scheme.
INCLUDED:
- 1x GBA Shell
- 1x Battery Cover
- 1x Set of screws
- 1x Standard gray buttons (membranes not included)
- 1x Plastic lens
- 1x Shell Sticker
PAIRS WELL WITH:
NOTES:
- This shell is NOT IPS-modified. Shell modification/trimming required for IPS installation.
- Applicable console text is present.
- Not recommended/compatible with Laminated LCD kits.
- The shells feature self-threading screws as the screw posts are not pre-threaded. To avoid damage, do not over-tighten, as this may cause cracks. Refunds are not given in these instances.
- Included with SFC shell option: silicone button pads, colored buttons as pictured. Standard gray buttons not included**
The screw posts on these shells need serious retooling. Trying to put the shell together for the first time is an exercise in madness. The provided screws don't go in well at all, and if you try to use your original screws that will go even worse. Be prepared to ruin all your screws and screwdrivers, damage the shell, and spend hours fighting with this nightmare. At least the color looks nice and it's the right size.
The shell isn't built properly. Paint is smudged at some locations and the glass screen I ordered with it isn't even the same size its smaller. Now I have gaps all along the screen and the shell. Once you close the shell together it doesnt close flush together. But I guess for the price you get what you pay for.
The gba shell the screws holes weren’t threaded.
Thanks for the feedback! For all aftermarket shells the screw posts are not pre-threaded because if you need to open the console back up after closing, the more you do so, the more likely it is for the posts to be stripped of the threads or break.
My shell looks nice, but the plastic is much lower quality than my OEM shell. I ended up having to trim parts of the shell to get it to fit together correctly as there were leftover plastic bits from the molding process. The screws don't go in very well either When I was putting in the screw by the battery compartment the plastic started to wear thin and turn white on the surface, which ruined the shell for me. The window for the screen lens is a little too large too which means you will have to be more careful when installing it or risk blocking part of the screen.
I'm sorry to hear of the issue! Please message us at support@handheldlegend.com so we may get this resolved for you.
Was a little tight lining up the holes and tightening down the screws, but not too bad. My advice would be to start the screw holes, take them back out, then assemble. That's my plan for next time.
The screws and fittings didn’t seem quite right, the latch on battery cover was bet out of shape. Nothing seemed to fit quite right either, even with a standard GBA screen and board.