Free Basic Shipping on Orders Over $75! (USA Only, Some exclusions apply)
Usually ready in 2-4 days
Replacement battery LED for your Nintendo Game Boy DMG, Game Boy Color or Game Boy Pocket. Included resistor for better compatibility. LED plastic is slightly opaque in nature. This will help diffuse the light for fully illuminated LED.
These LEDs can be used for a variety of game consoles such as N64 and GameCube as well.
Open your Game Boy by removing the 6 tri-wing screws on the back panel. Also remove the Phillips head screws connecting the front PCB to the front shell. Separate the two units and locate the LED. Use a solder wick to remove the solder around the led leads. Remove the LED.
You will need to replace the "R1" resistor located near the top of the PCB. Use your soldering wick again to remove the excess solder on the front of the PCB. Replace this resistor with a 2K-3K ohm resistor to reduce the brightness of the LED. Otherwise it would be much too bright. Solder the LED and the resistor in place and you are off to the races. Close her up and enjoy.
Our on-line store is open 24/7 and we ship Monday through Friday, excluding some holidays. Most products ship within 1 business day from our warehouse in Pennsylvania USA. Orders will be shipped in the order they are received. Please select a shipping speed according to your needs.
Hand Held Legend is committed to keeping retro gaming alive and better than ever. Upgrade your childhood consoles with modern tech. We strive for excellence in all that we do and aim to serve our customers well.
I love these LEDs. I got color charging and green. The green looks great but the color changing ones convinced me to put them into my Gameboy Color. I used a slow changing LED for the battery light in front and a fast change one as the charge indicator on my McWill charging kit.
No resistor needed when soldering to the newer display boards on the DMG. Works & looks great on my DMG with the hispeedido display.
Used the Slow Changing Rainbow LED in mine and a couple friends GameCubes. Very small easy inexpensive mod that will make you the envy of the neighborhood.
I replaced my 5mm red power LED with this one on my Nintendo 64. It worked great. The color went really well with my new blue translucent shell.
It goes super dim earlier than the original red LED, but it looks so much better! Installed in a gameboy color, can't say much about other models though!
GBC, Pink (specific review to color), FP IPS, Alkaline AA and OG Pelican power supply:
On power supply, the LED is borderline too bright to play at night, i adjust my hand to cover the LED while playing. Totally fine daytime.
On AA, LED is a comfortable brightness with fresh batteries. However im still playing and the LED appears nearly off at night, resulting in unnecessary battery anxiety and frequent need to save. Ive played over an hour with nerve racking low battery LED intensity.
Really looking forward to Li battery mod + voltage regulator and capacitor refresh, and hope that helps since the batt voltage curve is different and should stay bright until nearly dead. The Li constant current AA should also be nice w this LED. Sometimes considering trying to tune with a resistor but I dont think thats the answer for pink since i experience too bright and too dim, not just one or the other.
Hand Held Legend (HHL) is the leading provider of retro gaming upgrades and replacement parts in the United States. Our business is focused on supplying gamers, hobbyists, and modders alike with the highest quality products and services. We are professional nerds that love modernizing and restoring consoles from our childhood. We build consoles our 12-year-old selves would envy.
Our marketplace is open to all vendors and creators alike. If you would like more information, would like to give feedback or are interested in selling your products on our site please contact us at: firstname.lastname@example.org
519 Davisville Rd Suite 102, Willow Grove PA 19090
Get the latest news about new products, vendors, tutorials, and more.