• An IPS and lens all in one piece.
• Adjust brightness with touch sensor.
• Multiple display effects including a mixed frame rate switch.
• Long Touch the touch sensor for full OSD menu.
• Soldering optional for button controls.
  
• Applicable console text is present on lens. Holographic text.
  

INCLUDED:

• 1 x IPS LCD with lens adhered (see warnings)
• 1 x PCB ribbon cable with attached touch sensor
• 3 x Wires
• 1 x Bracket

PAIRS WELL WITH:

• Replacement Shell for Game Boy Advance - IPS Laminated - Funnyplaying (ONLY pairs with this shell)

DOCUMENTATION:

• Install Guide
• Install Video

NOTES:

• Only pairs with the Replacement Shell for Game Boy Advance - IPS Laminated - Funnyplaying. Other other shells require extensive trimming.
  
• If you received a bracket that looks different from the one in the product photo, you may have received the wrong bracket. Please check to make sure you have received the correct bracket. If this is not completed and the LCD kit is damaged, refunds will not be accepted.
• Long touch the touch sensor to bring up the OSD display, from there tapping the touch sensor once will adjust the value, and long holding the touch sensor a second time will allow you to cycle through the OSD. To exit OSD either wait 10 seconds or long hold the touch sensor for about 10 seconds.
• No longer includes foam. Touch sensor can be adhered to the back of the LCD with Kapton tape.
• After installation, if it is noted that your touch sensor is overly sensitive or is cycling, please see this article for assistance.

WARNINGS:

• You do not need to purchase a separate lens. Removing pre-adhered lens from LCD can result in damage to the LCD and will void product warranty. If you received an extra lens in your order, this was likely a included plastic lens with a shell and should NOT be placed on top of the pre-adhered lens.
• Test the kit before installation! Once the display is mounted with the included double-sided foam tape, it cannot be safely removed. We ask that you test the kit by hooking it up before removing the screen protector and before mounting the display using the foam tape.
• LCD may break if put under too much pressure or dropped. Please exercise extreme caution when installing.