Ribbon Cable Adapter for Game Boy Advance Aliexpress

Game Boy Advance Ribbon Cable Adapter

4.1 9 reviews SKU GBA6503

€5,46

Model:32-pin (white)

Show 1 discontinued modelsHide discontinued models

Quantity:

Pickup available at Hand Held Legend Usually ready in 2-4 days

INCLUDED

1x Ribbon Cable Adapter

Install this cable into your Game Boy Advance in order to install your AGS-101 Game Boy SP LCD.

How do I know which adapter I need? Look on the back of your GBA after removing the battery compartment to find a number on the PCB:

40 pin has white connector
32 pin has white connector
32 pin models start with a "1"
40 pin models start with a "0"

Using this cable may cause your screen to look washed out. If so, check out this thread. We cannot fully support that this item will work with the AGS-001 LCD. Refunds are not accepted in this instance.

Test before installation! When you receive a backlight/LCD kit, you should perform a dry run before installing to assure that nothing has been damaged in transit. A dry run or test fit means the kit is not installed in the shell. This includes the use of adhesives, brackets, and any performed soldering. All ribbon cables should have no bends or creases in them. If you are unsure how to perform a dry run, please contact our support team and we will be happy to help. Backlight kits that have been installed are not eligible for replacement or return.
LCD may break if put under too much pressure or dropped. Please exercise extreme caution when installing.

Independent product, not affiliated with Nintendo.

Nintendo®, NES®, Super Nintendo Entertainment System™, Nintendo 64®, Nintendo GameCube®, Game Boy®, Game Boy Color®, Game Boy Advance®, Nintendo DS™, Nintendo 3DS™, Wii™, Wii U™, Nintendo Switch™, and all related names, logos, and trademarks are the property of Nintendo Co., Ltd. or its subsidiaries.

This product is an independent, third-party restoration or accessory product and is not endorsed, licensed, sponsored by, or affiliated with Nintendo Co., Ltd. in any way.

40-pin (white)

Turned out great!

Easy install, couple case snips and a single solder point. If you have a faulty AGS 101 laying around and a gba you haven’t IPS modded, this is a great cheap way to make it far more playable.

40-pin (white)

Apparently there are 2 types

I was sent a ribbon cable that didn't work? Apparently there are two types and I have a white tabbed 101 screen and a 40 pin GBA so it didn't work? I bought a "Type B" ribbon cable from another place and that ones sure to work. Kinda wish I knew that before I wasted 13 bucks

40-pin (white)

Works as intended

Installation went smooth.
Soldering point is not required in order for the ribbon to work but will set brightness to max.

32-pin (white)

Pretty awful part.

The connector latch is hilariously narrow. you have to completely remove it and then use electrical tape to hold it down. It barely holds the signal without the latch's pressure, so I removed the tab from my ribbon cable and it was still too thick. I ended up kinking my ribbon cable and destroying the whole display. Thanks a bunch, HHL.

I'm sorry to hear of the issue. Please contact us at support@handheldlegend.com so we may resolve this for you.

32-pin (white)

Worked like a charm

I installed the ribbon on a 32 pin agb 001 with my ags 101 screen panel, installation was easy. And it just worked. I like it a lot better than the ips screens. This is my new favorite way to enjoy the gba game catalogue.

40-pin (white)

It works better than expected

Once it was installed into a GBA SP AGS 101 Screen thanks to DK Oldies it's sharper and better than the original screen.

1 2

CleanScreen Bracket for Game Boy Advance - RetroSix RetroSix

Game Boy Advance CleanScreen Bracket - RetroSix - Hand Held Legend

Game Boy Advance CleanScreen Bracket - RetroSix - Clearance

€1,36

USB-C Battery Cover for Game Boy Advance - Crystal Clear Series - RetroSix RetroSix

Game Boy Advance USB-C Battery Cover Crystal Clear Series - RetroSix - Clearance

€1,14

19 reviews

3 colors available

Game Boy Advance Shell Kit - RetroSix - Hand Held Legend

Game Boy Advance IPS Ready Shell Kit - RetroSix- Clearance

€13,65

3 reviews

3 colors available

Game Boy Advance Prestige Buttons - RetroSix - Clearance

€4,33

74 reviews

6 colors available

IPS Modified Prestige Shell for Game Boy Advance - RetroSix RetroSix

Game Boy Advance IPS Modified Prestige Shell - RetroSix - Clearance

€5,69

299 reviews

2 colors available

UV Printed Replacement Shell Sticker for Game Boy Advance - RetroSix RetroSix

Game Boy Advance UV Printed Replacement Shell Sticker - RetroSix - Clearance

€1,81

11 reviews

Fast Shipping

We know you’re excited to get your gear, so we ship fast—usually within 1-2 business days. With reliable carriers and tracking included, your order arrives quickly and safely, every time.

Great Support

Have questions or need help? Our knowledgeable team is here to assist with fast, friendly support. Whether it’s product advice or order issues, we’ve got your back.

Get in Touch

Transparency

What you see is what you get. We provide clear photos, detailed descriptions, and honest specs so you know exactly what you’re buying—no surprises.

Store Reviews

Rewards

Get more with every purchase. Join our rewards program to earn points you can redeem for discounts, exclusive offers, and more—just for shopping with us.

Rewards Program

Game Boy Advance Ribbon Cable Adapter

Customer Reviews

Deep Discounts

CLEARANCE

Why Choose our Store?