3.5 Inch Composite LCD

Price
€19,95
In stock! Usually ships within 1-2 business days.
SKU: SGG2510
Pickup available at 519 Davisville Rd.

Usually ready in 2-4 days

View store information

New TFT LCD for the SEGA Game Gear RetroSix CleanScreen V1 or Zega Mame Gear.

FEATURES:

  • 3.5" diagonal
  • 240x320 aspect ratio
  • Supports adjustable brightness and scaling modes
  • Part number LQ035NC111 
  • Currently not supported for the V4/5
  • Compatible with ONLY the V1 CleanScreen and Flex Cables.
  • Compatible with Zega Mame Gear.

INCLUDED:

  • 1x TFT LCD with pre attached ribbon cable

PAIRS WELL WITH:

DOCUMENTATION:

WARNINGS:

  • LCD may break if put under too much pressure or dropped. Please exercise extreme caution when installing.
Shipping Information

Our on-line store is open 24/7 and we ship Monday through Friday, excluding some holidays. Most products ship within 1 business day from our warehouse in Pennsylvania USA. Orders will be shipped in the order they are received. Please select a shipping speed according to your needs.

About Us

Hand Held Legend is committed to keeping retro gaming alive and better than ever. Upgrade your childhood consoles with modern tech. We strive for excellence in all that we do and aim to serve our customers well.

Customer Reviews

Based on 26 reviews
73%
(19)
8%
(2)
8%
(2)
4%
(1)
8%
(2)
D
Dunc
Decent screen but NOT useful for Clean Screen

Does not work with V3 (or v3.1) of retrosix boards and you can't get V1 boards so not sure why this is being sold as a retrosix screen if it's not compatible with the current offering from RetroSix. Screen will be permanantly offset and there is no easy fix for this unless you know how to modify screen timings.

Don't get me wrong, HHL customer service was excellent but this screen is useless to me and my needs based on the Clean Screen board and for that, it gets a 1 star.

Thanks for your review! We list on the product page for this LCD that it is only compatible with the V1 CleanScreen. We still list this for the Cleanscreen V1 if someone needs a replacement LCD for their V1 Cleanscreen or they haven't completed the install of the V1 yet/need the LCD in general.

P
Perry Blanchard
It works but it the display is misaligned with the retrosix cleanscreenn v3

I talked to Luke with retrosix he told me the new cleanscreenn v3 with the pclock booster is set specific to retrosix display

Thanks for your feedback! This bit of information is noted on the product page already as it is only compatible with V1 CleanScreen. The V2/V3 CleanScreens need the IPS LCD.

J
JS
Fantastic Value Moderately Easy Install

11/10 would recommend. This screen mod is absolute game changer for the game gear. I highly recommend finding an old PCB to practice on for anyone that doesn't have a lot of experience soldering small smd components.

J
John S.
Works Great

This is a fairly hard mod, just take it slow. Follow directions and you should have no problems. EXCEPT I would plug in the screen to the board before **** in spacers. Plug it in first then fold it over. Flex cable seems to short and hard to insert if you do it like instructions IMO. Used the wire free hookups for 1-chip. Looks great.

C
Chad
DOA

Screen arrived broken so was unable to test.

I'm sorry to hear of the issue! Please message us at support@handheldlegend.com so we may get this resolved for you.

R
Randall Strye
Works fine

As others have mentioned, the ribbon has very very tight tolerances. barely long enough to reach the connector. Could be the fault of the LCD or the board. Otherwise, the screen looks great.

You may also like