




Dreamcast Replacement Power Supply USBC Type C Mod - Robot_Retro
Dreamcast Replacement Power Supply USBC Type C Mod - Robot_Retro
519 Davisville Rd.
519 Davisville Road
Willow Grove PA 19090
United States
Choose options
Upgrade your Dreamcast's power supply with the Dreamcast Replacement Power Supply. Compatible with all models, this efficient and safe solution is powered by a 15v or 20v Power Delivery USBC charger. With a 90-95% efficiency rate, low signal noise and heat, and no flashing LEDs, this drop-in solution is perfect for clear shells. Plus, the included 3D printed spacer allows for easy installation.
FEATURES:
- Powered from a 15v or 20v Power Delivery USBC charger. Most 30W charger USBC will work.
- Low signal noise and heat.
- Drop in solution. No soldering, wires or complicated install required.
- Works with all Dreamcast models (PAL, Japanese, etc)
- Works with GDEmu.
- V1.1 includes 5V and 12V fan headers. Note, the Dreamcast still needs a fan connected into the OEM port in order for the console to boot.
INCLUDED:
- 1 x Dreamcast Replacement Power Supply USBC Type C PCD
- 1x White Spacer
PAIRS WELL WITH:
DOCUMENTATION:
Installation:
- Unscrew the four bottom Dreamcast screws as shown in the photo.
- Remove the top lid and then remove the two power board screws (see photos).
- Fit the robot_retro board in exactly the same way as the OEM power board was removed.
- Fit 3D printer USBC spacer.
- Reassemble the console.
NOTES:
- After install if you are having power issues, please check your power supply and USB-C cables. Robot_Retro recommends this wall charger for the best power delivery.