Game Gear 3.5 Inch Composite LCD
Game Gear 3.5 Inch Composite LCD
SKU : SGG4101
New TFT LCD for the SEGA Game Gear RetroSix CleanScreen V1.
FEATURES:
- Compatible with ONLY the V1 CleanScreen and Flex Cables.
- Currently not supported for the V4/5
- 3.5" diagonal
- 240x320 aspect ratio
- Supports adjustable brightness and scaling modes
- Part number LQ035NC111
INCLUDED:
- 1x TFT LCD with pre attached ribbon cable
PAIRS WELL WITH:
WARNINGS:
- LCD may break if put under too much pressure or dropped. Please exercise extreme caution when installing.
Friendly Returns
Secure Checkout
1-2 Days Shipping
Prompt Customer Support
Does not work with V3 (or v3.1) of retrosix boards and you can't get V1 boards so not sure why this is being sold as a retrosix screen if it's not compatible with the current offering from RetroSix. Screen will be permanantly offset and there is no easy fix for this unless you know how to modify screen timings.
Don't get me wrong, HHL customer service was excellent but this screen is useless to me and my needs based on the Clean Screen board and for that, it gets a 1 star.
Thanks for your review! We list on the product page for this LCD that it is only compatible with the V1 CleanScreen. We still list this for the Cleanscreen V1 if someone needs a replacement LCD for their V1 Cleanscreen or they haven't completed the install of the V1 yet/need the LCD in general.
I talked to Luke with retrosix he told me the new cleanscreenn v3 with the pclock booster is set specific to retrosix display
Thanks for your feedback! This bit of information is noted on the product page already as it is only compatible with V1 CleanScreen. The V2/V3 CleanScreens need the IPS LCD.
11/10 would recommend. This screen mod is absolute game changer for the game gear. I highly recommend finding an old PCB to practice on for anyone that doesn't have a lot of experience soldering small smd components.
This is a fairly hard mod, just take it slow. Follow directions and you should have no problems. EXCEPT I would plug in the screen to the board before **** in spacers. Plug it in first then fold it over. Flex cable seems to short and hard to insert if you do it like instructions IMO. Used the wire free hookups for 1-chip. Looks great.
Screen arrived broken so was unable to test.
I'm sorry to hear of the issue! Please message us at support@handheldlegend.com so we may get this resolved for you.
As others have mentioned, the ribbon has very very tight tolerances. barely long enough to reach the connector. Could be the fault of the LCD or the board. Otherwise, the screen looks great.
Orders placed with us will be fulfilled within 1 to 2 business days. Delays may occur depending on the volume we experience. This is especially true during sales and around the winter holidays. Once a package is fulfilled, we are unable to make any changes to the order or cancel it. Please review your entire order and the shipping information before completing the order for accuracy. Refunds will not be given under these circumstances. Once packages leave our warehouse, it is not in our control how fast it will get to you from there regardless of shipping option chosen. The shipping times shown are estimates, not guarantees. Refunds will not be given under these circumstances.
Free Shipping for order of $75 or more*. Exludes Ultimate conoles and custom controllers.
Hand Held Legend is committed to keeping retro gaming alive and better than ever. Upgrade your childhood consoles with modern tech. We strive for excellence in all that we do and aim to serve our customers well.
*If you would like to return or receive a refund on any item, please contact support@handheldlegend.com first to ensure that your item will qualify.
Purchases are eligible for return within 30 days of purchase. If 30 days have gone by since your purchase, unfortunately we can’t offer you a refund or exchange.
When you receive a backlight/LCD kit, you should perform a dry run before installing to assure that nothing has been damaged in transit. A dry run or test fit means the kit is not installed in the shell. This includes, but is not limited to, the use of adhesives, brackets, and any performed soldering. All ribbon cables should have no bends or creases in them. If you are unsure how to perform a dry run, please contact our support team and we will be happy to help. Backlight kits that have been installed are not eligible for replacement or return. If a backlight/LCD is returned and shows any signs of having been installed, it will not be eligible for a refund.
Requested returns/refunds/exchanges for items you believe to be defective, will be subject to a troubleshooting process with our support team before proceeding with a return/replacement/refund.
Modifying a product in any way, including but not limited to removing or adding components, will result in the voiding of our return/refund policy.
To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging.
Defective or damaged parts are free to return within 30 days of purchase. Shipping costs are not covered for items returned at a customer's request or the refusal of the troubleshooting process with our support. Refunds for shipping costs and Route Shipping Insurance will not be given.
Please note that international orders are not eligible for a prepaid shipping label for returns on defective products. Returns must be paid for by the customer.
To complete your return, we require a receipt or proof of purchase.
Returns can be sent to:
Hand Held Legend
Attn: Returns
519 Davisville Road; Unit 102
Willow Grove, PA 19090
There are certain situations where only partial refunds are granted (if applicable).
We reserve the right to deduct an amount proportional to the chosen shipping return method from your refund if you order does not quality for a free return:
Refund Deduction Amounts by Shipping Method (USA):
- $5.00 for USPS First Class Mail Returns
- $10.00 for USPS Priority Mail Returns
- $13 for all over carrier returns
REFUNDS (IF APPLICABLE)
Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund.
If you are approved, then your refund will be processed, and a credit will automatically be applied to your original method of payment, within 1-7 business days.
Refunds for shipping costs and Route Shipping Insurance will not be given.
LATE OR MISSING REFUNDS (IF APPLICABLE)
If you haven’t received a refund yet, first check your bank account. Then contact your bank or credit card company. It may take some time before your refund is officially posted.
If you’ve done all of this and you still have not received your refund, please contact us at support@handheldlegend.com.
EXCHANGES (IF APPLICABLE)
We only replace items if they are defective or damaged. If you need to exchange it for the same item, send us an email at support@handheldlegend.com.
CANCEL/EDIT ORDERS
You may cancel or edit orders yourself (before fulfillment) by following the steps in this guide. If you edit/cancel your order, you can expect a refund within 1 to 7 business days. Orders that have been fulfilled by our shipping team cannot have edits made or be canceled. We will do our best to assist customers in this process if needed, but it is the responsibility of the customer to ensure that their order and shipping information is correct before processing the order. We are not responsible for any issues that may occur due to incorrect items, shipping information, etc on orders.