Super easy to over thread and strip screws, also watch other mod videos and get an idea of where to sand down rough edges that can damage and press on screen.

This shell is great minimum trim needed for a ips screen. Paired with the dmg style buttons and the ips is better than a gameboy light. Now my favorite modded gb.

These are quite good quality shells. Especially for the price. They look and feel great. My only 2 improvements would be to have the posts **** ready instead of needing tap the posts. I ended up needing to use the oem screws after tapping as the provided ones would not tightened down with the exception of the two in the battery compartment. The other would be to adjust the inside for screen alignment. I didn’t see a way to adjust the screen alignment to avoid having the screen be a tad to far up and to the left, the space just didn’t seem to be there.

The shell is great for the price. Everything fits pretty well, but with a new glass lens the opening edges of the left and top well show a bit. It's just enough to look off a bit. It could be the lens, but the actual display is really close to the excess plastic and would be better if it wasnt there. Could resolved it with a little trimming before putting the lens in.

Received my shell with a very noticeable scratch on the front between the buttons and d pad. Its also more of a clear white rather than fully transparent. These do not come pre-threaded, so its very possible to strip some screws

With the instructions of the guide, putting the screen as far left as possible and top as possible, the screen is off center. You'll need to not only cut the tabs as illustrated in the picture, but you'll also need to sand down the curved walls near the **** posts. I broke the lens taking it out after having taped it down, that's on me, but the instructions should include directions for the premade shells instead of only focusing on the modification of OEM shells.