SEGA Game Gear CleanJuice Rechargeable USB-C Battery Module - RetroSix
SEGA Game Gear CleanJuice Rechargeable USB-C Battery Module - RetroSix
SKU : SGG6000
Upgrade your Game Gear from AA batteries to a drop-in USB-C module with dual rechargeable battery packs. Designed and tested in the UK by a reputable modder and builder, the RetroSix CleanJuice for Game Gear is the ultimate upgrade to your console.
FEATURES:
- Adds 22.2 watt hours of power to give you upwards of 13 hours of game time!
- Charge at any time using a regular USB-C cable.
- Includes 3D printed spacer, apply this after installation.
- USB-C charging (cooler 36C charging at full power)
- Fused outputs on all rails (USB, 5V, 34V, VSYS)
- Low battery trigger (flashing red LED on low battery)
- Delayed VREF (to allow EverDrive or mods to power up before GG)
- Delayed 5V to allow VREF to control GG before providing 5V
- Adjustable 4.5 to 5.5V for stabalising GG operation
- 34V Toggle Switch
- VREF Bypass Switch (to test GG VREF circuit faults)
- Discharge 5V rail resistors (if GG discharge circuit is bad)
- Ultra low noise 5V rail (<10mV ripple under full load)
- Battery Test LED
- System Voltage Rail LEDs
INCLUDED:
- 1x Sega Game Gear CleanJuice USB-C PCB
- 1x Rechargeable battery with JST 2 POS CON and 7cm cable
- 1x Rechargeable battery with JST 2 POS CON and 33cm cable
- 1x Clear Spacer
PAIRS WELL WITH:
-
SEGA Game Gear Prestige Shell
- SEGA Game Gear CleanScreen - RetroSix
- SEGA Game Gear 3.5" TFT LCD for CleanScreen - RetroSix
-
SEGA Game Gear CleanScreen Wire-Free Flex Cable- RetroSix
-
Sega Game Gear Left Battery Cover
- Sega Game Gear Right Battery Cover
INSTRUCTIONS:
- Remove the old power board and insert the new CleanJuice power board.
- Insert both batteries into the AA battery compartments and feed the wires through.
- Connect the batteries to the CleanJuice board in any order (Connector only fits in one way).
- The battery with the longer cable should be placed in the compartment that is further away from the CleanJuice board. Refer to the product images to see the setup.
- If you're using a regular / OEM Game Gear shell you will have to trim the battery compartment stumps to fit the batteries in the battery compartments.
- If you're using a RetroSix shell there is not need for modification.
- Put the battery covers back on the console and you're ready to go.
- Fully charge the CleanJuice and enjoy over 13 hours of battery life with the CleanScreen and CleanAmp mods installed.
- Compatible with all Game Gear versions. Trimming may be required to plug in to VA4/VA5 units. See photos for where to trim if the connector does not fit.
- Board has two LED's - USB and CHARGE.
- The tiny switch located on the middle right of the board should be positioned to the left in order to enable the 34V for an original LCD. Otherwise it should be positioned to the right for any modern LCD kit, including CleanScreen series.
DOCUMENTATION:
NOTES:
- Current version (8/28/24) is V1.3.0.
- Created by RetroSix.
Light Indicator Key:
- If the USB labeled light on the board is on, this means the USB cable is providing power to the system. This also means you can power your console from the USB without draining the battery - plug and play option.
- If the CHG labeled light on the board is on, this means the USB is charging the battery. When it goes off, the battery is fully charged.
- Both indicator lights will be on when module is charging. When module is fully charged, only the USB light will remain.
- If you connect a USB cable and the USB light does not turn on, your cable or power supply are faulty.
WARNINGS:
Risk of fire if improperly charged or if battery is punctured. Only use protected power sources along with power delivery (PD) compliant cables and chargers. Using uncertified hardware may result in more than 5v being delivered to your CleanJuice product. Damage caused by unsupported hardware voids our return/exchange policy. Examples of supported chargers:
- Nintendo Switch charger
- MacBook Pro type C charger
- Samsung type C charger
- Google Pixel charger
- USB A to USB C cable (certified only!)
Risk of fire is also possible if PCB is used with AA batteries or battery packs are inserted backwards.
Friendly Returns
Secure Checkout
1-2 Days Shipping
Prompt Customer Support
Orders placed with us will be fulfilled within 1 to 2 business days. Delays may occur depending on the volume we experience. This is especially true during sales and around the winter holidays. Once a package is fulfilled, we are unable to make any changes to the order or cancel it. Please review your entire order and the shipping information before completing the order for accuracy. Refunds will not be given under these circumstances. Once packages leave our warehouse, it is not in our control how fast it will get to you from there regardless of shipping option chosen. The shipping times shown are estimates, not guarantees. Refunds will not be given under these circumstances.
Free Shipping for order of $75 or more*. Exludes Ultimate conoles and custom controllers.
Hand Held Legend is committed to keeping retro gaming alive and better than ever. Upgrade your childhood consoles with modern tech. We strive for excellence in all that we do and aim to serve our customers well.
*If you would like to return or receive a refund on any item, please contact support@handheldlegend.com first to ensure that your item will qualify.
Purchases are eligible for return within 30 days of purchase. If 30 days have gone by since your purchase, unfortunately we can’t offer you a refund or exchange.
When you receive a backlight/LCD kit, you should perform a dry run before installing to assure that nothing has been damaged in transit. A dry run or test fit means the kit is not installed in the shell. This includes, but is not limited to, the use of adhesives, brackets, and any performed soldering. All ribbon cables should have no bends or creases in them. If you are unsure how to perform a dry run, please contact our support team and we will be happy to help. Backlight kits that have been installed are not eligible for replacement or return. If a backlight/LCD is returned and shows any signs of having been installed, it will not be eligible for a refund.
Requested returns/refunds/exchanges for items you believe to be defective, will be subject to a troubleshooting process with our support team before proceeding with a return/replacement/refund.
Modifying a product in any way, including but not limited to removing or adding components, will result in the voiding of our return/refund policy.
To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging.
Defective or damaged parts are free to return within 30 days of purchase. Shipping costs are not covered for items returned at a customer's request or the refusal of the troubleshooting process with our support. Refunds for shipping costs and Route Shipping Insurance will not be given.
Please note that international orders are not eligible for a prepaid shipping label for returns on defective products. Returns must be paid for by the customer.
To complete your return, we require a receipt or proof of purchase.
Returns can be sent to:
Hand Held Legend
Attn: Returns
519 Davisville Road; Unit 102
Willow Grove, PA 19090
There are certain situations where only partial refunds are granted (if applicable).
We reserve the right to deduct an amount proportional to the chosen shipping return method from your refund if you order does not quality for a free return:
Refund Deduction Amounts by Shipping Method (USA):
- $5.00 for USPS First Class Mail Returns
- $10.00 for USPS Priority Mail Returns
- $13 for all over carrier returns
REFUNDS (IF APPLICABLE)
Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund.
If you are approved, then your refund will be processed, and a credit will automatically be applied to your original method of payment, within 1-7 business days.
Refunds for shipping costs and Route Shipping Insurance will not be given.
LATE OR MISSING REFUNDS (IF APPLICABLE)
If you haven’t received a refund yet, first check your bank account. Then contact your bank or credit card company. It may take some time before your refund is officially posted.
If you’ve done all of this and you still have not received your refund, please contact us at support@handheldlegend.com.
EXCHANGES (IF APPLICABLE)
We only replace items if they are defective or damaged. If you need to exchange it for the same item, send us an email at support@handheldlegend.com.
CANCEL/EDIT ORDERS
You may cancel or edit orders yourself (before fulfillment) by following the steps in this guide. If you edit/cancel your order, you can expect a refund within 1 to 7 business days. Orders that have been fulfilled by our shipping team cannot have edits made or be canceled. We will do our best to assist customers in this process if needed, but it is the responsibility of the customer to ensure that their order and shipping information is correct before processing the order. We are not responsible for any issues that may occur due to incorrect items, shipping information, etc on orders.