• Built-in 5 display effects.
• Full pixel copy display (display the highest brightness, gorgeous and concise)
• Classic GBC display (perfectly restore the original display effect)
• Classic RGB display (perfectly restore the original display effect, and the pixel gap looks smaller, the brightness will be slightly darker)
• RGB display (closest to the original display, but the brightness is very low)
• Grid line display (close to the display effect of DMG)

PAIRS WELL WITH:

• Game Boy Color FunnyPlaying Retro Pixel Laminated Q5 IPS Shell (ONLY pairs with this shell)
• Game Boy Color CleanAmp Pro - RetroSix

DOCUMENTATION:

• Install and shell trim guide - *Please read warning at the top of product page before proceeding with purchase/install.
• How to test your LCD kit - *Soldering may be required to dry test this kit. Soldering the power wire in this case will not void the return policy.
• Install Guide
• Install Video

NOTES:

• Kits may no longer include a touch sensor as a separate item. This kit has a touch sensor already included on the black ribbon cable. You may use this one by simply folding into the front or back of the shell, to rest on the top of the shell. You may also use the included touch sensor ribbon and solder it onto the 'TCH' point. Depending on the size/shape of this touch ribbon will change it's placement within the shell.
• The power wire may need to soldered for the LCD to show an image. It may not be required with later versions, however, in order to receive maximum brightness on the LCD this wire will need to be soldered on. If your LCD is not showing an image (remains black but you hear the start chime), please solder the PWR wire.
• After installation, if it is noted that your touch sensor is overly sensitive or is cycling, please see this article for assistance. 

WARNINGS:

• You do not need to purchase a separate lens. Removing pre-adhered lens from LCD can result in damage to the LCD and will void product warranty. If you received an extra lens in your order, this was likely a included plastic lens with a shell and should NOT be placed on top of the pre-adhered lens.
• Test before installation! When you receive a backlight/LCD kit, you should perform a dry run before installing to assure that nothing has been damaged in transit. A dry run or test fit means the kit is not installed in the shell. This includes the use of adhesives, brackets, and any performed soldering. All ribbon cables should have no bends or creases in them. If you are unsure how to perform a dry run, please contact our support team and we will be happy to help. Backlight kits that have been installed are not eligible for replacement or return.
  
• LCD may break if put under too much pressure or dropped. Please exercise extreme caution when installing.