The Game Boy Color NES Retro Pixel Laminated LCD Kit from FunnyPlaying is a step up from standard IPS display mods featuring a laminated LCD along with a custom NES style shell and custom Video System™ screen lens. 

• A Full Kit to modify your GBC
• Laminated IPS Kit - No need to worry about dust getting trapped under the lens
• 25% larger display area than the original
• 5 built-in display effects
• The 2.5D version indicates a radius on the edge of the glass screen lens

INCLUDED:

• 1 x Laminated GBC IPS Kit LCD or Laminated 2.5D GBC IPS Kit LCD
• 1 x PCB ribbon cable with attached touch sensor
• 1 x Touch sensor ribbon
• 2 x 20mm Wire
• 1 x 5mm Wire
• 1x Insulation film
• 1 x NES Style GBC Shell (front & back with battery cover)
• 1 x Set of NES Style GBC Buttons
• 1 x Set of GBC Membranes
• 1x Set of screws
• 3x Console stickers

PAIRS WELL WITH:

• Rechargeable Battery Mod for Game Boy Color - FunnyPlaying

DOCUMENTATION:

• Written Guide
  
• Video Guide
• How to test your LCD kit

NOTES:

• FUNCTIONS:
  
  • Hold down START and SELECT together for a few seconds, the "GAME" on the lens should be the only word lit up. This is "Mode 1." Here you can use the SELECT and START button to move the display image down and up respectively.
  • Tap on the touch sensor to bring it to "Mode 2." You should see "Boy" lit up now. Here You can use SELECT and START to move the display image left and right respectively.
  • Tap on the touch sensor again to bring it "Mode 3." You should see "Color" lit up. Use START and SELECT separately to cycle through the different color options.
  • Hold down START and SELECT together again for a few seconds to confirm, and exit. 
  • To cycle the different Pixel modes, tap and hold where the touch sensor is for a few seconds, and the LCD will change to different screen modes each time you perform this.
  
  
• PIXEL MODES:
  
  • Built-in 5 display effects.
  • Full pixel copy display (display the highest brightness, gorgeous and concise)
  • Classic GBC display (perfectly restore the original display effect)
  • Classic RGB display (perfectly restore the original display effect, and the pixel gap looks smaller, the brightness will be slightly darker)
  • RGB display (closest to the original display, but the brightness is very low)
  • Grid line display (close to the display effect of DMG)
    
    
• After installation, if it is noted that your touch sensor is overly sensitive or is cycling, please see this article for assistance. 

WARNINGS:

• Test the kit before installation! Once the display is mounted with the included double-sided foam tape, it cannot be safely removed. We ask that you test the kit by hooking it up before removing the screen protector and before mounting the display using the foam tape.